CHLFT - 765-2527 BLACK PLASTI DIP SPRAY-ON COATING (12 OZ AEROSOL)

  • MSDS: CHLFT
  • Manufacturer: PDI INC
  • Product Name: 765-2527 BLACK PLASTI DIP SPRAY-ON COATING (12 OZ AEROSOL)
  • National Stock Number: 6850-00D007393
Product Identification

Product ID:765-2527 BLACK PLASTI DIP SPRAY-ON COATING (12 OZ AEROSOL)
MSDS Date:06/14/1993
FSC:6850
NIIN:00D007393
MSDS Number: CHLFT

Responsible Party
PDI INC
3760 FLOWERFIELD RD
BLAINE, MN 55434
US

Emergency Phone: 612-785-2156

Info Phone: 612-785-2156

Cage: 0B629

Contractor
PDI INC
CIRCLE PINES, MN 55014-3919 US

Telephone: 612-785-2156

Cage: 0B629

Ingredients

TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


MINERAL SPIRITS; VM&P NAPTHA

CAS: 64475-85-0

RTECS: PY8240000


PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9596


ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000


RESINS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXANE (N-HEXANE) (CERCLA)

CAS: 110-54-3

RTECS: MN9275000

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED/REPEATED OVEREXPO COULD
RESULT IN BRAIN AND NERVOUS SYSTEM DAMAGE(REFERRED TO AS SOLVENTS
OR PAINTERS SYNDROME).
Explanation of Carcinogenicity:PER
MSDS:CARCINOGENICITY:NTP/IARC/OSHA:NO.
Effects of
Overexposure:INHAL:HEADACHE,DIZZINESS,DROWSINESS,FATIGUE,IRREGULAR
HEARTBEAT.SKIN:IRRIT.INGEST:NOT LIKELY BUT IF IN SOME MANNER IT WAS
INGESTED THE SYMPTOMS FOR INHAL ABOVE WOULD APPLY IN ADDN TO NAUSEA
AND PROBAB LY VOMITING.EYE:IRRITATION. TOLUENE KNOWN TO STATE OF CA
TO CAUSE REPRODUCTIVE TOXICITY.
Medical Cond Aggravated by Exposure:PRE-EXISTING HEART,LIVER,KIDNEY AND
LUNG DISORDERS.

First Aid

First Aid:INHAL:REMOVE TO FRESHA IR.GIVE OXY IF BREATH DIFFI & GIVE ART
RESP IF VICTIM NOT BREATH.SYMPTOMS PERSIST CALL PHYSICIAN.SKIN:WASH
W/SOAP/WATER.INGEST:CALL PHYSICIAN OR POSION CONTROL CENTER &
FOLLOW T HEIR INSTRUCTIONS IMMED.EYE:FLUSH W/LG AMOUNTS OF
WATER.IRRITATION PERSISTS CALL PHYSICIAN.

Fire Fighting

Flash Point Method:TOC
Flash Point:<20F,<-7C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:1.1
Upper Limits:10.5
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE POSITIVE PRESSURE MODE SELF-CONTAINED
BREATHING APPARATUS WITH FULL FACEPIECE.

Accidental Release

Spill Release Procedures:PREVENT RUN-OFF TO SEWERS.WIPEUP W/FLOOR
ABSORBENT.TRANSFER TO HOOD.ELIMINATE ALL SOURCES OF IGNITON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHILE NOT IN
USE.STORE IN WELL VENTILATED AREA BELOW 120F.KEEP AWAY FROM
SPARKS,FLAME AND HIGH HEAT SOURCES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:IF EXPOSURE LEVEL IS EXCEEDED USE NIOSH/MSHA
APPROVED ORGANIC VAPOR CARTRIDGE RESPIRATOR.
Ventilation:LOCAL:SUPPLEMENTAL IF NEEDED. GENERAL:YES.
Protective Gloves:NOT NORMALLY
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:NE
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:55
Vapor Density:3.5
Spec Gravity:0.78-0.80
pH:NP
Viscosity:NP
Evaporation Rate & Reference:3.0, BUTYL ACETATE=1
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS COLORS (BLACK), SYRUPY LIQUID, MILD ODOR
Percent Volatiles by Volume:81
Corrosion Rate:NP

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACID,ACID BASES,OXIDIZIGN AGENTS, SELECTED AMINES,ACTIVE METALS
OR POWDERS.
Stability Condition to Avoid:HIGH TEMPERATURES, OPEN FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
POSSIBLY PHOSGENE AND HYDROGEN CHLORIDE.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.